Menü
Search
Close this search box.

Electro magnet GT-130

Electro magnet

Electro magnet with a holding force, maintained by continuous application of current.

Contents

Back to all holding solenoids
7_09_1_GT-130-1
7_09_1_GT-130-1

Contents

Back to all holding solenoids
7_09_1_GT-130-1
7_09_1_GT-130-1

Specifications

Electrical power
23.9W
Distance Z
Magnet - counter plate [mm]
0  |  0.1  |  0.5  |  1  |  2  |  3  |  4  |  5
Holding force [N]
6200  |  5500  |  2400  |  750  |  220  |  110  |  70  |  55
Residual holding force (de-energized) [N]
~620  |  0
Preferred nominal voltage
24 VDC (max. 230 VAC)
Duty cycle ED%
100%
Insulation class
B (130°C) DIN VDE 0580
Test voltage
Overvoltage category
EN 60664-1
III
Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP65 (IEC 60529)
El. connection type
Lead wire W
Plug-in connection S

Stranded wire (300mm), AWG20
Plug-in connector DIN 175301-803
Rectifier
Lead wire W
Plug-in connection S
max. current 1.5A
not available
available
Surface treatment
Housing nitrocarburized
Total magnet weight
4.000 kg
GT

Notes

  1. Holding magnets manufactured and tested according to DIN VDE 0580
  2. Holding force measured at operating temperature at 20°C Ambient temperature with 90% nominal voltage
  3. The holding force values are only valid as reference values and may deviate by ±10% due to tolerances
  4. The holding force is valid with the ground surface in contact Counter plate made of steel S235 (EN 10025)
  5. Special versions are available
  6. Subject to change without notice - Illustrations non-binding
  7. RoHS compliant, free of halogens (PVC)
  8. Our "Technical Explanations" provide information on about the use of holding magnets as well as to general assembly and safety instructions
Download PDF with details

Technical drawings

 

 

Specifications

Function

pulling / pushing

Preferred nominal voltage

24VDC (max. 230VAC)

Insulation class

B (130°C) DIN VDE 0580

Prüfspannung
Overvoltage category

EN 60664-1 III

Protection class
Lead wire W
Plug-in connection S

IP20 (IEC 60529)
IP40; max. IP65 (IEC 60529)

El. connection type

Stranded wires (300mm), AWG20 plug connection DIN-175301-803

Surface treatment

black lacquered

Moving mass

0.060kg

Total magnet weight

0.430kg

Technical drawings

 

 

GT

Notes

  1. Holding magnets manufactured and tested according to DIN VDE 0580
  2. Holding force measured at operating temperature at 20°C Ambient temperature with 90% nominal voltage
  3. The holding force values are only valid as reference values and may deviate by ±10% due to tolerances
  4. The holding force is valid with the ground surface in contact Counter plate made of steel S235 (EN 10025)
  5. Special versions are available
  6. Subject to change without notice - Illustrations non-binding
  7. RoHS compliant, free of halogens (PVC)
  8. Our "Technical Explanations" provide information on about the use of holding magnets as well as to general assembly and safety instructions
Download PDF with details

Got questions?

Leave us your question, we will answer it as soon as possible.

Facebook Instagram Linkedin
Contact

ISLIKER MAGNETE is an independent, internationally active family business specializing in the development, production and distribution of innovative solenoid technology products.

Legal pages

ISLIKER MAGNETE is an independent, internationally active family business specializing in the development, production and distribution of innovative solenoid technology products.

Contact
Legal pages

© 2022 ISLIKER MAGNETE AG - all rights reserved.

Webumsetzung mit ♥ von der Werbeagentur hingucker.ch